Quay side bollards and mooring pins
Quay-side bollards by E.J. BeanE.J. Bean manufacturers quay side bollards and mooring pins. Apart from their standard cast iron bollards, we also offer the type of bollards typically used in the Port of Rotterdam: our BKW (welded) and BKS (shear bolt) bollards in GS 60.3 cast steel.
All technical data on E.J. Bean bollards can be downloaded on www.fendercare.com.
Please note that you need to register in order to be able to download the technical data sheets.
Sizes mentioned in the table are subject to change and only refer to standard sizes. Custom sizes are available upon request.
| Article | Material | Type | Size | Anchors | |
 |
Triton | Cast Iron | Elephant head | Pull force 50-200 ton | 4 |
 |
Y | Cast Iron | Pillar type | Pull force 10-150 ton | 4 - 8 |
 |
X-A | Cast Iron | T-head type | Pull force 5-200 ton | 5 - 7 |
 |
Twin | Cast Iron | Twin Horn type | Pull force 5-200 ton | 4 - 7 |
 |
BKW | Cast Steel | Elephant Head, welded | Pull force 60-240 ton | 4 |
 |
BKB | Cast Steel | Elephant Head, shear bolt | Pull force 60-240 ton | 4 |
 |
Pins | Cast Steel | Mooring Pins | Pull force 30 ton | 4 |
E.J. Bean bollards and mooring pins are available in a wide variety of sizes and types. Anchor bolts are typically in Grade 8.8 or 10.9 and available in numerous sizes. As the requirements for the bollards depend on the construction of the quay wall, usually the bollard will be designed and manufactured to order.
Several paintsystems can be applied and non-destructive or destructive tests are possible upon request.
|
 |